How do I set up the function keys on the Yealink phone?
Assign function keys on Yealink phones with sipgate functions – setup step by step.
Most Yealink phones allow the function keys to be assigned with sipgate functions.
To initially set up the function keys, please press the key on the Yealink Menu to have your current IP address of the respective device displayed (e.g. 192.168.0.10)
Open your computer's web browser and enter the displayed IP address in the address bar.
To log in to the configuration interface, use the password you chose. If you have not changed the password yet, both "username" and "password" are admin.
Initiate transfer
Enter under Functions ➔ General Information ➔ Send Tran DTMF the value *3 and save the settings. Make sure that “Replace Tran DTMF” is set to “enabled”. In addition, you can activate the option “Send pound key” to initiate the transfer directly after entering the destination number.
After that, it should be possible for you to initiate a transfer again via the device's transfer key followed by extension/phone number and # key.
An overview of the available keyboard shortcuts can be found in this article.
Last updated